Most buyers read the datasheet carefully and the certificate of analysis quickly. That is backwards — the datasheet is a marketing summary of the range, the certificate is the only document describing your actual shipment.

What a certificate should contain

  • Unique lot number matching the carton marking
  • Measured gauge with its actual value, not the nominal
  • Measured OTR and WVTR with test conditions stated
  • Sealing window measured on the actual lot
  • Production date and line identification

The three checks that catch problems

1. Gauge against the tolerance. If your specification says 125 μm ± 7 % and the certificate reads 118 μm, the lot is inside tolerance. If it reads 116 μm, it is not — and the barrier will be lower than specified because barrier scales inversely with gauge.

2. Barrier against the condition. Does the OTR on the certificate specify 23 °C / 65 % RH? A certificate quoting 0 % RH is not comparable to a specification that assumes a chill cabinet.

3. Lot number against the carton. Traceability is only real if the paperwork and the physical box agree. If they do not, stop the receiving process.

The habit worth building

Sample one carton per shipment against the certificate before the film goes to the line. It takes ten minutes and it catches a labelling error or a mixed lot long before it becomes a recall.